-
Rubber products
-
Rubber seals, gaskets, cuffs, rings
- Hydraulic cuffs GOST 14896 - 84
- Rubber sealing cuffs for hydraulic devices TU 38-1051725-86
- Chevron rubber seals for hydraulic devices GOST 22704-77
- Lane "Lion" TU 605 389 942 012-200
- Pneumatic sealing rubber cuffs GOST 6678-72
- Кольца уплотнительные O-Ring
- Rubber sealing rings GOST 9833-73, GOST 18829-73
- Rubber sealing cuffs for pneumatic devices GOST 6678-53
- MUVP Rings
- MUVP Bushings
- Sprockets for elastic couplings GOST 14084-93
- BX rings for cast iron water pipes
- SAM rings for asbestos cement pipes GOST 5228-89
- Rubber mud collectors for hydraulic and pneumatic cylinder rods GOST 24811-81
- Reinforced cuffs GOST 8752-79
-
Rubber hoses (hoses)
- Sleeves and couplings of a gasket structure (durite) TU-005-6016-87
- Pressure-suction rubber hoses GOST 5398-76
- Pressure rubber sleeves with thread reinforcement, non-reinforced GOST 10362-76
- Pressure hoses Univis GOST 18698-79
- Pressure hoses GOST 18698-79
- Pressure rubber sleeves with a thread winding frame, long and lightweight
- Hoses for gas welding GOST 9356-75
- PVC sleeves (reinforced irrigation hose)
- Hoses and hoses for irrigation TU 00152106-94
- Rubber sealing cords and tubes
- Industrial Semperit Sleeve
-
UNIVIS sleeves
- UNIVIS steam and hot water hoses
- UNIVIS water and air hose
- Multi-purpose sleeve UNIVIS MP-20-EPDM
- UNIVIS FUEL HOSE NBR 20 bar
- Sleeve for UNIVIS HEAT PROTECTION cooling systems
- UNIVIS HOT WASH EPDM hot wash sleeve
- UNIVIS FOOD S&D UPE FDA Food Sleeve
- UNIVIS oil and fuel hoses
- Sleeves for acids and alkalis UNIVIS
- UNIVIS fuel hoses
- UNIVIS BULK MATERIAL abrasive sleeve –S&D-NR
- Sleeve for UNIVIS DELIVERY CEMENT abrasive
- Hoses (RVD) for high-pressure washers
- Drive belts
- Technical plate
-
Rubber mixtures
- Rubber compound TU 380051166-2015 (NTA)
- Rubber compound TU 2512-046-00152081-2003
- Wear-resistant and shock-absorbing rubber compounds TU 380051166-2015 (NTA)
- Raw rubber for the manufacture of sealing and other products working in contact with food products TU 381051705-86
- Rubber compound for gumming of chemical equipment TU 381051559-87
- Artificial road unevenness
- Components of milking machines
-
PVC sleeves
- Flat-turnable sleeve (180 LAY FLAT series)
- Flat-turn sleeve (series 186 LAY FLAT)
- Flat-turnable sleeve (190 LAY FLAT series)
- 1000MSAF – Vacuum sleeve reinforced with metal wire, polyester thread, antistatic strand
- 1000MS – Vacuum sleeve reinforced with metal wire
- 1000MSF – Vacuum sleeve reinforced with metal wire and polyester thread
- 1000MSA – Vacuum sleeve reinforced with metal wire and antistatic strand
-
Rubber seals, gaskets, cuffs, rings
-
Conveyor belts
-
Conveyor belts GOST 20-2018
- Conveyor Belt Docking Kit
- Rubber for side sealing of conveyor belts E40 Side Skirt (red)
- SUPER SCREW connection
- General purpose rubber bands for light operating conditions
- Heat-resistant conveyor belts
- Hard-to-ignite frost-resistant conveyor belts
- Mine hard-to-burn conveyor belts
- Connecting the conveyor belt
- Oil resistant conveyor belts
- Oil- and heat-resistant conveyor belts
- General purpose rubber bands for very heavy, heavy and medium operating conditions
- Acid-alkali resistant conveyor belts
- Chevron Conveyor Belts
- Chevron conveyor belts for road cutters
- Imported conveyor belts
-
Conveyor belts GOST 20-2018
-
High pressure hoses
-
RVD
- Sleeves (RVD) with one metal braid DIN EN 853 1 SN
- Sleeves (RVD) with three metal braids DIN EN 857 SPC 3
- Sleeves with four metal windings DIN EN 856 Din 4SP
- Sleeves with four metal windings DIN EN 856 Din 4SH
- High pressure hoses with non-removable crimping tips (fittings)
- Drilling hoses 50, 76, 102 mm
- Fittings and protection for RVD
-
RVD
- Asbestos products
- Flexible duct hoses
-
Engineering plastics
-
Polyurethane products
- Road Roller Scrapers
- Conveyor belt cleaner (primary cleaning scraper knife)
- Water separator disc for sugar factories
- Polyurethane knife for runway sweepers
- Уплотнения из полиуретана, фторопласта, резины NBR, FPM, EPDM, изготовленные методом точения
- Polyurethane rods, bushings and cones
- Rings made of polyurethane, fluoroplast, NBR, FPM, EPDM rubber, made by turning
- Polyurethane plate for dumps of road construction equipment (DST plate)
- Polyurethane coating of wheels, rollers and shafts, restoration of wheels of warehouse loading equipment
- Sprockets for cam couplings
- Cleaners, scrapers and conveyor boards
- Polyurethane sheet
- Polyurethane lining and sieves
- Polyurethane track cover (shoe) for road milling cutter
- Textolite
- Caprolon
- Fluoroplast
-
Polyurethane products
- Rubber carpets
- Related products
General purpose paronite PON
Asbestos products / Paronite
Предназначен для:
- пресной перегретой воды;
- насыщенного и перегретого пара;
- сухого нейтрального и инертного газа;
- воздуха;
- водного раствора солей;
- жидкого и газообразного аммиака;
- спирта;
- жидкого кислорода и азота;
- тяжелых и легких нефтепродуктов.
Температурный режим в зависимости от назначения
-40°С до +450°С
Рабочее давление в зависимости от назначения
от 0,25 до 6,4 МПа
Плотность
1.8-2,0 г/см
Толщина
0,4-6 мм
Standard sizes
| Основные типоразмеры | |
| Длина | до 4000 мм |
| Ширина | до 1800 мм |
Показать полностью
